Siemens WM16Y880TI Instruction Manual And Installation Instructions
Siemens WM16Y880TI Instruction Manual And Installation Instructions

Siemens WM16Y880TI Instruction Manual And Installation Instructions

Advertisement

Quick Links

en Instruction Manual
and Installation
Instructions
WM16Y880TI
Washing machine
www.siemens-home.com

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WM16Y880TI

  • Page 1 Instruction Manual and Installation Instructions WM16Y880TI Washing machine www.siemens-home.com...
  • Page 2 Please take a couple of minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands of the Siemens brand, each washing machine, which leaves our factory, is inspected thoroughly to ensure that it functions properly and is in perfect condition.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t io n Ma n u a l a n d I n s t alla t io n In s t r u c t i o n s Before washing Ø...
  • Page 4: Ø Intended Use

    Intended use B e f o r e wa s h i n g Ø For use in the household only. Ø The washing machine is suitable for washing machine- washable textiles and hand-washable wool in wash liquor. Ø The washing machine is suitable to be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines.
  • Page 5: Ø Safety Instructions

    Safety instructions ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. ã...
  • Page 6 ã Caution! Danger of scalding! When washing at high temperatures, you may be scalded if you touch the hot wash liquor (e.g. if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency). Allow detergent solution to cool down. ã...
  • Page 7: Ø Protection Of The Environment

    Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance has been identified in accordance with the European Directive 2002/96/EG on Waste Electrical and Electronic Equipment (WEEE). The Directive specifies the framework for an EU-wide valid return and recycling of waste appliances.
  • Page 8: Ø The Main Points In Brief

    The main points in brief Insert mains plug. Open the washing To switch on, press Select the Turn the tap on. machine door. programme, e.g. button. Cottons. ú Dosage: automatic Please load laundry: max. 8kg Sort the washing. Insert the washing. Do not exceed maximum load.
  • Page 9: Ø Getting To Know Your Appliance

    Getting to know your appliance 2SHUDWLQJ HOHPHQWV 'HWHUJHQW GUDZHU 'LVSOD\ HOHPHQWV 'UXP OLJKW GHSHQGLQJ RQ PRGHO 'RRU 6HUYLFH IODS FODFN 6HUYLFH IODS DQG FORVLQJ WKH GRRU 2SHQLQJ ...
  • Page 10: Ø Detergent Drawer

    Detergent drawer Intelligent Dosing System (i-Dos): Your washing machine features an intelligent dosing system for liquid detergent and ô ô softener. Dispensers i-Dos (1.3 l) and i-Dos (0.5 l) in the detergent drawer are used for this. You can select whether you want to use one liquid detergent and one softener or two liquid detergents.
  • Page 11: Operating Elements/Display Elements

    Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. Ü Indicator lights for intelligent dosage Start/Reload button to start, interrupt ~ Page 34 and cancel the programme (e.g. reload ¦ ~ washing). Button ecoPerfect Page 16, Simultaneously hold down Settings Page 28...
  • Page 12: Ø Before Each Washing

    Before each washing O p e r a t i n g t h e a p p l i a n c e ² – Install and connect washing machine properly. Refer to ~ Page 53 – Before the 1st wash, wash once without any washing. ~ Page 63 1.
  • Page 13 Otherwise, the load display may malfunction. ~ Page 40 Press the button. The appliance is switched on. The Siemens logo is indicated on the display panel and all programme indicator lamps are lit. Then always the Cottons programme preset at the factory is displayed.
  • Page 14 – For appliances with drum light: After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit. The light goes out automatically. Select a programme. You can use the saved programme or select another programme, Programme Overview, refer to ~ Page 22, or select other programmes (see...
  • Page 15 – Do not load washing until the main menu for the saved programme is displayed after the Siemens logo. – The load bar progresses as the washing machine is loaded. If the max. load is exceeded, the bar flashes. Do not exceed indicated max.
  • Page 16 Ø Change Temperature, Spin, Finish in time: Selecting and changing e.g. the Temperature: ô © i-Dos 1400 2:31 øø ô ¨ °C i-Dos The arrows on the display panel indicate which buttons are used to change the settings. The settings are active without acknowledgement and are displayed in the main menu.
  • Page 17 – Select/deselect option by pressing the two buttons displayed on the right. The selected options are immediately active. In the case of multi-level settings keep touching the buttons to run through the settings automatically. – Wait or back to the main menu by pressing Options button.
  • Page 18: Ø Washing

    Washing During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress. The arrows are switched on and off according to the programme progress.
  • Page 19 If the programme selector is adjusted or a button is selected while the childproof lock is active, the symbol flashes briefly. Ø Topping up washing When the programme has started, washing can be reloaded or taken out as required. Ü Select Start/Reload ô...
  • Page 20 Ø End of programme by Rinse Hold Rinse hold reached: Select "spin" or "drain" and then "start". Spin Drain 1. Select Spin (If required, adjust the spin speed) or Drain. Ü 2. Select Start/Reload End of the programme Finished, remove washing is indicated on the display panel. Finished, remove washing If Foam has been detected is also indicated on the display panel, the washing machine has detected too much foam during the...
  • Page 21: Ø After Washing

    After washing Open washing machine door and remove washing.. ú Remove the washing. Switch off the device. ² – Do not leave any items of washing in the drum. In the next wash they may shrink or discolour something else. –...
  • Page 22: Ø Programme Overview

    Programme overview The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Name of the programme max. load Õ Brief explanation of the programme and for selectable temperature as °C which textiles it is suitable. selectable spin speeds in rpm, the max.
  • Page 23 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Delicates/Silk max. 2 kg For delicate, washable textiles, e.g. made of cold – 30 – 40 °C silk, satin, synthetic fibres or blended fabrics 0 ... 600 ... 800 rpm ²...
  • Page 24 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Shirts/Blouses max. 2 kg Shirts/Blouses made of cotton, linen, cold – 40 – 60 °C synthetics fibres or blended fabrics. 0 ... 800 rpm For non-iron shirts the shirts/blouses are æ...
  • Page 25 see ... Additional programs The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Down Wear max. 2 kg Machine-washable textiles filled with down, cold – 40 – 60 °C ² pillows, blankets. 0 ... 1200 rpm .
  • Page 26 see ... Additional programs The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Spin/Low program Extra spin cycle at reduced speed and with especially gentle spin mechanism. 0 ... 800 ... 1200 rpm æ ç æ : 0 ...
  • Page 27 À Á Dose textile-guard agent (max. 170 ml) in dispenser Ü Select Start/Reload . After-treatment of the washing according to manufacturer’s instructions. Starching ² The washing should not be treated with fabric softener. Select Rinsing programme. À Á Manually dose liquid starch into dispenser (if required, clean beforehand) according to manufacturer’s instructions.
  • Page 28: Ø Programme Settings/Options

    Programme settings/options Depending on the programme, you can use the programme options to adjust the washing process even more efficiently to your items of washing. Programme settings/options: Ø Are active without acknowledgement. Ø Can be selected or deselected or changed depending on the programme progress.
  • Page 29 Buttons Notes ô To change the softener dosage strength (or i-Dos detergent when container content: detergent set) for light – normal – the selected programme permanently until the next strong – off change: – light: slightly soft washing – normal: normally soft washing –...
  • Page 30 Press Options button to select: Notes Pre-wash For heavily soiled washing. on – off For intelligent dosage: Selected detergent is used for prewash and main wash. To prevent overdosage, select medium i-Dos setting. For manual dosage: Divide detergent for pre-wash and main wash.
  • Page 31: Ø Anti-Stain System

    Anti-stain system General information about stains The Stains additional programme option for treating special stains can be found via the Options button. A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain.
  • Page 32: Ø Intelligent Dosing System

    Intelligent Dosing System Your washing machine features an intelligent dosing system for ô liquid detergent and softener. Dispensers i-Dos (1.3 l) and ô i-Dos (0.5 l) in the detergent drawer are used for this. You can select whether you want to use one liquid detergent and one softener or two liquid detergents.
  • Page 33 ² When selecting your detergent and care product, follow the instructions of the manufacturers. We recommend the use of standard, universal and color liquid and gel-like detergents for all machine-washable, coloured textiles made of cotton and synthetic materials. Ø Use only self-flowing liquid products and gels which the manufacturer recommends adding to a detergent drawer.
  • Page 34 In daily use Ø Illuminated displays on the drawer handle – Display is lit if intelligent dosage is selected for the i ô dispenser. In the case of the combined container the indicator light is lit for the stored container content for detergent).
  • Page 35 Standard settings Ø If required, change basic dosages for detergent and softener: The basic dosage amount to be set corresponds: For detergents – to the manufacturer’s recommendation for normal soiling and to the particular water hardness. For softeners – to the manufacturer’s recommendation for medium softness and to the particular water hardness.
  • Page 36 ô – When the i-Dos container content is switched from softener to detergent, the basic dosage amount of detergent for this container is set to the factory setting (75 ml) and the dosage for this detergent is set to off in all permitted programmes.
  • Page 37 Manual dosage In the case of programmes in which intelligent dosage is not possible or not requested (then set intelligent dosage to off), À Á detergent is added to detergent drawer In addition to intelligent dosage of detergents - cleaning agents such as water softener, bleach or stain remover can also be dosed here.
  • Page 38: Ø Consumption Values

    Consumption values Programme Load Energy Water *** Programme consumption *** duration *** Cotton 30 °C * 8 kg 0.38 kWh 57 l 2:21 h Cotton 40 °C * 8 kg 0.97 kWh 57 l 2:31 h Cotton 60 °C * 8 kg 1.31 kWh 57 l...
  • Page 39: Ø Appliance Settings

    Appliance settings By pressing the Settings 3 sec. buttons, appliance settings can be changed, e.g. button signal. Simultaneously hold down Settings 3 sec. buttons for approx. 3 seconds: Language è end signal button signal Ø If the buttons are held down, the settings automatically run through.
  • Page 40: Sensors - Your Washing Machine Is So Intelligent

    Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor During the wash and rinse cycles the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the washing and rinsing water.
  • Page 41: Ø Care And Maintenance

    Care and maintenance Clea n i n g a n d ma i n t e n a n c e ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance. Pull out the mains plug! ã...
  • Page 42 i-Dos Clean the detergent drawer Ø Drain dispensers The dispensers have drainage openings with removable stoppers in the front area. To drain the dispensers, first remove the drawer handle as illustrated: 1. Open detergent drawer. 2. Pull release lever (A) on the back of the drawer handle (bottom middle) gently towards yourself and simultaneously ...
  • Page 43 3. Press release lever and completely remove drawer. 4. Carefully remove drawer cover. ã Caution! Detergent drawer may be damaged! The detergent drawer contains electrical components. They may be damaged if they come into contact with water. – Do not clean the cover in the dishwasher and do not immerse in water.
  • Page 44 Drain pump blocked ã Warning! Danger of scalding! Wash liquor is hot when washing at high temperatures. You may be scalded if you touch the hot wash liquor. Allow detergent solution to cool down. ² Turn the tap off to prevent more water from flowing in and to ensure that it is drained via the pump.
  • Page 45 Drainage hose on the siphon blocked Switch off the appliance. Pull out the mains plug! Note: Residual water may run out! Loosen hose clip, carefully remove drainage hose. Clean drainage hose and siphon spigot. Re-attach drainage hose and secure connection point with hose clip.
  • Page 46: Ø Emergency Lock Release, E.g. If Power Failure Occurs

    Emergency lock release, e.g. if power failure occurs The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: ã Warning! Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding.
  • Page 47: Ø Information On The Display Panel

    Information on the display panel Display Cause/Remedy The door cannot be – Washing may be caught. Please open and close washing Ü locked, please open machine door again and select Start/Reload the door again, then – If required, shut washing machine door or remove washing and close it and select shut again.
  • Page 48: Ø Faults, What To Do

    Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. Ü Water not flowing in. – Start/Reload not selected? Detergent not – Tap not open? – Filter blocked? Clean the filter. ~ Page 45 washed in.
  • Page 49 Faults Cause/Remedy Display panel/ – Power failure? indicator lights do – Fuse tripped? Switch on/replace fuse. – If the fault occurs repeatedly, call customer service. ~ Page 50 not function while the appliance is running. The programme – Not a fault – unbalanced load detection system adjusts takes longer than imbalance by repeatedly distributing the washing.
  • Page 50: Customer Service

    Customer service If you cannot rectify the fault yourself, Faults, what to do?~ Page 48, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance.
  • Page 51: Ø Standard Accessories

    Standard accessories In s t a l l i n g t h e ap p l i a n c e GHSHQGLQJ RQ PRGHO $TXD6WRS 6WDQGDUG$TXD6HFXUH 0DLQV FDEOH :DWHU RXWOHW :DWHU LQOHW ,QVWUXFWLRQ PDQXDO DQG ,QVWDOODWLRQ LQVWUXFWLRQV &RYHUV ZLWK KRVH FOLS (OERZ IRU VHFXULQJ WKH ZDWHU RXWOHW KRVH...
  • Page 52 Hose and cable lengths GHSHQGLQJ RQ PRGHO &RQQHFWLRQ RQ OHIW VLGH &RQQHFWLRQ RQ ULJKW VLGH a FP a FP a FP a FP PD[ a FP a FP  FP a FP a FP ² If the hose holders are used, the possible hose lengths are reduced! Available from dealer/customer service: Ø...
  • Page 53: Ø Installation

    Installation ² Humidity in the drum is caused by the final inspection. Secure installation ã Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g.
  • Page 54 ã Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries. Do not lift the washing machine by its projecting parts.
  • Page 55 Installing the appliance on a base or on a wooden joist ceiling ã Warning! Washing machine may be damaged!! The washing machine may wander during the spin cycle and topple/fall off the base. Always secure the washing machine feet with fixing brackets.
  • Page 56: Ø Remove Transportation Protection Devices

    Remove transportation protection devices ã Caution! Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place.
  • Page 57 Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Prepare/separate cover. Insert covers. ² Lock covers firmly by pressing on the locking hook. Insert hose holder. Secure hoses in the hose holders.
  • Page 58: Ø Connecting The Water

    Connecting the water ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). ² – To prevent leakage or water damage, follow the instructions in this chapter! –...
  • Page 59 on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. ² Screw connection is under water pipe pressure. Water drainage hose ² – Do not kink or protract the the water supply hose. –...
  • Page 60 Drainage into a siphon ã Warning! Water damage possible! If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine, leaking water may cause damage. Connection point must be secured with hose clip, Ø...
  • Page 61: Ø Alignment

    Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. ² All four feet must be firmly on the floor. The washing machine must not wobble! Tighten the lock nut against the housing.
  • Page 62: Ø Electrical Connection

    Electrical connection Electrical safety ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. –...
  • Page 63: Ø Before The 1St Washing

    Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. ² The washing machine must have been installed and connected properly.
  • Page 64: Transportation, E.g. If Moving House

    Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 45 Drain any residual detergent solution. Maintenance – Drain pump blocked Isolate the washing machine from the power supply.
  • Page 65: Index

    Index Alignment, 61 Aqua-Sensor, 40 Anti-stain system, 31 Automatic programmes, 26 Button Options, 11, 16 ecoPerfect, 11, 16, 28 speedPerfect, 11, 16, 28 Finish in, 11, 16, 28 Spin, 11, 16, 28 ô Start/Reload, 11 i-Dos , 11, 17, 29 ô...
  • Page 66 i-Dos, 10, 22, 29 Information on the display panel, 47 Clean the dispenser, 42 Insert Drain dispensers, 42 the laundry, 13, 15 Filling dispenser, 32 Insert the washing In daily use, 34 the laundry, 14 Standard settings, 35 Installation, 53 Switching on the appliance, 32 Installing transportation...
  • Page 67 Technical specifications, 52 washing, 19 Temperature, 11, 16, 28 Transport bolts, 56 Topping up Unbalanced load detection Unloading system, 40 the laundry, 21 Water Plus, 30...
  • Page 68 Calls from a BT landline will be charged at up to 3 pence per minute. 01450 2655 Please find the contact data of all countries in the enclosed customer service list. Siemens-Electrogeräte GmbH Carl-Wery-Str. 34, 81739 München Germany 9000788087 (9205)

Table of Contents