Table of Contents
Advertisement
Before washing for the first
time
The washing machine was thoroughly
tested before leaving the factory. To
remove any water that may be left over
from the test, run the first wash cycle
without any laundry.
Notes
The washing machine must be
■
correctlyinstalled and connected.
(from ~ Page 46).
Never use a damaged machine.
■
Inform your customer services.
Preparatory work:
Check the machine.
1.
Fill the ß and i dispensers.
2.
~ Page 31
Remove the protective film from the
3.
control panel.
Connect the mains plug.
4.
Turn the tap on.
5.
Run the programme without laundry.
Switch on the appliance.
1.
Close the door (do not load any
2.
laundry).
Set the Drum clean 90 °C
3.
programme.
Open the detergent drawer.
4.
Pour approx. 1 litre of water into
5.
compartment À Á.
Pour standard detergent into
6.
compartment À Á.
To prevent foaming, only use
Note:
half the amount of detergent
recommended by the detergent
manufacturer. Do not use detergent
designed for woollens or delicates.
Close the detergent drawer.
7.
Press the Ü button.
8.
Switch off the appliance at the end of
9.
the programme.
Your washing machine is now ready to
use.
Positioning and connecting
en
53
Advertisement
Table of Contents
