Wheel - DAAN Groups VoltzToys SX1719 User Manual

6. WHEEL ASSEMBLY
a. Front wheel assembly
The wheel is to be assembled in the following order. Insert the front wheel,
tire sleeve (pre-assembled inside wheel), washer, and nut. Tighten the nut
to secure, and install the wheel cover.
b. Rear wheel assembly
1. First, adjust the rear axle until the rod is equally distanced on both sides.
The length must be equal on both ends.
2. The wheel is to be assembled in the following order. Insert the rear
wheel, tire sleeve (included with wheel), washer, and nut. Tighten the nut
to secure, and install the wheel cover.
3. Make sure one assembled wheel is in contact with the ground before as-
sembling the other wheel. (If the other wheel can not be assembled, pull
out the rear axle until it is fully extended, then re-attempt assembly).
10