Toro 147-1660 Manual page 6

3
Removing the Existing Left
Motion-Control Lever
No Parts Required
Procedure
Remove the 2 flange-head bolts (3/8 x 1 inch) securing
the existing left motion-control lever and remove the
left motion-control lever
Retain the 2 flange-head bolts (3/8 x 1 inch) for later
installation.
(Figure 5).
Figure 5
SUPERCEDED
4
Removing the Deck-Lift
Spring
No Parts Required
Procedure
1. Remove the spring bolt securing the front of the
deck-lift spring
2. Remove the shoulder bolt and locknut (1/2 inch)
securing the rear of the deck-lift spring
6).
3. Remove the deck-lift spring
g345967
1. Spring bolt
2. Deck-lift spring
4
(Figure 6).
(Figure 6).
Figure 6
3. Locknut (1/2 inch)
4. Shoulder bolt
(Figure
g346041