Preparing The Machine - Toro 147-1660 Manual

1

Preparing the Machine

No Parts Required
Procedure
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
N -L position.
EUTRAL OCK
4. Engage the parking brake.
5. Shut off the engine and remove the key.
6. Disconnect the negative battery cable.
7. Push the deck-lift pedal fully forward to lock the
mower deck in the T
1).
1. L position—the
OCK
mower deck locks into
the transport position.
2. U position—the
NLOCK
mower deck does not lock
into the transport position.
position (Figure
RANSPORT
SUPERCEDED
Figure 1
3. Push on the deck-lift pedal
using your foot to raise the
mower deck.
8. Support the mower deck using 4x4 blocks of
wood.
9. Remove the height-of-cut pin from the
height-of-cut bracket
1. Height-of-cut pin
g332768
2
(Figure 2).
Figure 2
2. Height-of-cut bracket
g332766