Advertisement
Quick Links
Bucket Mount Kit
Grandstand
Model No. 147-0300
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Revolution
Description
No parts required
No parts required
Bucket-mount plate
Screw (1/4 x 1/2 inch)
Mount bracket
Top bracket
Carraige bolt (5/16 x 7/8 inch)
Handle knob
Maximum weight decal
Bucket (5 US gallons)
Register at www.Toro.com.
®
Mower
Qty.
–
Prepare the machine for installation.
–
Drill the motor control cover.
1
3
1
1
Install the Bucket Mount Kit.
1
1
1
1
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3465-847 Rev A
Installation Instructions
Use
*3465-847*
Advertisement
Related Manuals for Toro Grandstand Revolution 147-0300
Summary of Contents for Toro Grandstand Revolution 147-0300
- Page 1 Install the Bucket Mount Kit. Carraige bolt (5/16 x 7/8 inch) Handle knob Maximum weight decal Bucket (5 US gallons) *3465-847* © 2023—The Toro® Company Original Instructions (EN) Register at www.Toro.com. 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420...
- Page 2 Preparing the Machine Drilling the Motor Controller Cover No Parts Required No Parts Required Procedure Park the machine on a level surface. Procedure Disengage the drives and the power take-off. Note: For installation assistance, contact an Shut off the machine and remove the key. Authorized Service Dealer.
- Page 3 On the lower portion of the motor controller cover, measure and mark the 2 hole locations as shown below. Installing the Bucket Mount Parts needed for this procedure: Bucket-mount plate Screw (1/4 x 1/2 inch) Mount bracket Top bracket Carraige bolt (5/16 x 7/8 inch) Handle knob g465640 Maximum weight decal...
- Page 4 Install the decal on the mount bracket as shown Loosely install the top bracket to the mount below. bracket using the carriage bolt (5/16 x 7/8 inch) and handle knob. g465805 Figure 4 1. 21 to 19.7 cm (8.25 to 7.75 2.
Need help?
Do you have a question about the Grandstand Revolution 147-0300 and is the answer not in the manual?
Questions and answers