Toro 147-1660 Manual page 10

4. Secure the wire harness near the relays using
the taptite screw (Figure
Figure 14
5. Install the 2 relays
Figure 15
14).
(Figure 15).
SUPERCEDED
8
Install the Left Side Pod
and Fuel-Tank Cap
No Parts Required
Procedure
1. Remove the fuel-tank cap
2. Secure the left side pod using the previously
removed 4 shoulder screws
g347395
3. Install the fuel-tank cap
9
Connecting the Wire
Harness
No Parts Required
Procedure
1. Connect the kit wire harness to the machine wire
harness connector labeled CONN-DECK LIFT.
g347393
2. Connect the kit wire harness connector to the
new left motion-control lever connector
16).
1. Kit wire harness connector 2. New left motion-control
3. Connect the kit wire harness to the actuator.
8
(Figure 3).
(Figure 4).
(Figure 3).
Figure 16
lever connector
(Figure
g347392