Communication; Cim Modules; Fault Finding; Technical Data - Grundfos MAGNA3 Instructions Manual

8. Communication

8.1 CIM modules

8.1.1 Fitting the CIM module

Warning

Before fitting the
module, switch off the
power supply. Make
sure that the power
supply cannot be
accidentally switched
on.

9. Fault finding

Warning
Before dismantling the
pump or related parts,
drain the system and
close the isolating
valves on both sides of
the pump as the
pumped liquid may be
scalding hot and under
high pressure.
Warning
If the power supply
cable is damaged, it
must be replaced by the
manufacturer, the
manufacturer's service
partner or a similarly
qualified person.

10. Technical data

10.1 Ambient temperature

0 to 40 °C.

10.2 Maximum system pressure

The maximum system
pressure is indicated on the
nameplate:
PN 6: 6 bar / 0.6 MPa
PN 10: 10 bar / 1.0 MPa
PN 16: 16 bar / 1.6 MPa.

11. Further product information

grundfos.com/MAGNA3-manual

12. Disposal

This product has been
designed with focus on the
disposal and recycling of
materials. The following
average disposal values apply
to all variants of Grundfos
MAGNA3 pumps:
• 85 % recycling
• 10 % incineration
• 5 % depositing.
This product or parts of it must
be disposed of in an
environmentally sound way
according to local regulations.
Subject to alterations.
9