Unpacking - SATO D508 Service Manual

Unit 1: Overview

UNPACKING

When unpacking the printer, take note of the following:
The box should stay right-side up.
1
Lift the printer out of the box carefully.
Remove the plastic covering from the
2
printer.
Remove the accessory items from their
3
protective containers.
Note:
The following parts shown here are representative only. Due to regional requirements and our policy of
continual improvement, your printer may not be packed with the exact parts as shown here, but the
unpacking steps are similar.
Printer
SATO D508/D512 Service Manual
User documentation and software
package (where applicable)
If the printer has been stored in the
4
cold, allow it to reach room
temperature before turning it on.
Set the printer on a solid, flat surface.
5
Inspect the shipping container and
printer for any sign of damage that
may have occurred during shipping.
AC adaptor and cable
Page 1-4