Receiver Mode; Tuner Mode - Shure GLXD6 User Manual

Guitar Pedal Receiver Overview
① Power Switch
Turns power on or off.
② DC Power Connector
Connect DC power supply (9 to 15 V DC, 250
mA min., 400 mA max.)
Note: Compatible with positive tip or negative tip
power supplies.
③ Audio Output Jack
Connect to amplifier or mixer.
Note: If using multiple effects pedals, place the
receiver pedal first in the signal chain.
④ USB Port
For uploading firmware updates
⑤ Display
Displays receiver and tuner settings.
Display Screen, Indicators, and Controls
The controls and display offer specific functionality depending on which mode is selected:

Receiver Mode

link
3
4
mode
① Transmitter Battery Meter
Illuminated segments indicate
remaining battery life
② Display
Group
Channel
LK (controls locked)
UN (controls unlocked)
-- (frequency not available)
③ Link Button
Press to manually link receiver to a
transmitter or to activate the remote
ID function
④ Mode Button
Press to enable audio gain
adjustment. Use ▲ ▼ buttons to
adjust gain.
4
⑥ Antenna
Two antennas per receiver. Antennas pick up the signal from the
transmitter.
⑦ Footswitch
Press to select receiver or tuner mode.
1 2
group
9
8
audio auto rf channel
5 6 7
⑤ Audio LED
Illumination corresponds to audio
level. Rapid flashing indicates
audio clipping.
⑥ Mute LED
Illuminates when audio output is
muted.
⑦ RF LED
- ON = Linked transmitter is on
- Flashing = Searching for
transmitter
- OFF = Linked transmitter off or
transmitter unlinked
⑧ Channel Button
Press to select and edit channel
⑨ Group Button
Press to select and edit group
1
2 3

Tuner Mode

5
① Flat Indicator
Illuminates when note is flat.
② Tuning Bar Display
LEDs illuminate to indicate tuning
deviation.
③ Sharp Indicator
Illuminates when note is sharp.
④ Note Display
Displays the name of the note or
(--) if the tuner is idle.
⑤ Mode Button
Press to enter tuner menu
settings.
4
5 link group
6
mode audio auto rf channel
7
1 2
3
link group
4
mode audio auto rf channel
⑥ Arrow Buttons
Use ▲ ▼ buttons to select and edit
menu settings.
⑦ Frequency Detuned/Reference
Pitch Offset indicator
A dot is displayed when the tuning
or pitch has be set to a non-standard
value.
Note: Non-standard turning or pitch
settings scroll across the receiver dis-
play during power-up.
6
6