Tuner Menu - Shure GLXD6 User Manual

Tuner Menu

Enter tuner mode by pressing the footswitch.
In tuner mode, the controls will only affect tuner functions, RF and audio settings are not affected.
Note: The audio signal does not pass through the tuner, eliminating the need for bypass switches commonly found on wired tuners.
Tuner Options
• Indicator: Needle or Strobe
• Output: Live, Mute, or Both
• Display Brightness
• Detune
• Sharps and Flats
• Reference Pitch
Indicator: Needle or Strobe
The tuner indicator can be set to display a needle style or strobe style.
Needle
A single LED will illuminate on the
tuning bar to indicate sharp or flat.
The green center LED will illuminate
when the note is in tune.
N..e..e..d..l..e
Note: Indicator and Output settings are displayed in a scroll from left to right.
Choosing Live or Mute Audio Output
The following modes are available to set the audio output to Live or Mute when the
footswitch is pressed in tuner mode.
Note: Text for the output settings are displayed in a scroll from left to right.
Mode
Live
Mute
Both
*Note: In Both mode, the pedal powers up in Receiver Display. Press the footswitch
to enter tuner mode.
L....i....v....e M....u....t....e
Display Brightness
The receiver has a built-in light sensor to automatically adjust the display brightness.
To manually adjust the brightness choose one of the following settings:
*A = automatic *1 = low
10
Selecting and Editing Tuner Menu
Settings
Use the following buttons to select and edit the tuner menu
settings:
• Use the mode button access the menu and to scroll be-
• Use the Use ▲ ▼ buttons to change a menu parameter
• Use the footswitch to enter and save parameter changes
Strobe
A sequence of three LEDs will travel across
the tuning bar in the direction of sharp or
flat. The LEDs will remain stationary when
the note is in tune.
S..t..r..o..b..e
Footswitch Function
Receiver Display (audio Live) ↔ Tuner
Display (audio Live)
Receiver Display (audio Live) ↔ Tuner
Display (audio Mute)
Tuner Display (audio Mute) ↔ Tuner
Display (audio Live)*
*2 = medium *3 = high
tween menu settings
Detune
The tuner can be set to display standard tuning for instruments that have been de-
tuned up sharp or flat in the following increments:
• Up to 5 steps sharp (#1-#2 -#3-#4-#5)
• Up to 6 steps flat (b6-b5-b4-b3-b2-b1)
The notation for standard tuning is b0
b0
= Standard Tuning
* dot appears on the display as a reminder that the pedal is detuned.
Sharps and Flats
Adds sharp or flat symbols to the display of non-natural notes.
Sharps and Flats
Reference Pitch
The reference pitch can be offset from standard A440 in a range of 432 Hz to 447 Hz
in 1 Hz increments.
When adjusting the pitch, the last 2 digits of the value will be displayed. For example,
"32" would appear on the display when the pitch has been set to 432 Hz.
A dot appears on the display as a reminder that the reference pitch has been offset.
432 Hz
link
M...e...n...u
mode auto rf
Example of note displayed in Detune
mode
Flats only Sharps only
A440 447 Hz
group
channel