Other Features - Beko BEEPI 090 User Manual

3 Unit specifications and features
Room relative humidity less
than 80%. If the air conditioner
C operates in excess of this figure,
the surface of the air conditioner
may
Please sets the vertical air flow
louver to its maximum angle
(vertically to the floor), and set
HIGH fan mode.
To further optimize the performance of your
unit, do the following
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and
TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
A guide on using the infrared remote is not included
in this literature package. Not all the functions are
available for the air conditioner, please check the
indoor display and remote control of the unit you
purchased.

3.5 Other features

• Auto-Restart (some units)
If the unit loses power, it will automatically restart
with the prior settings once power has been
restored.
• Anti-mildew (some units)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
• Wireless Control (some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
18 / 120 EN
attract condensation.
For the USB device access, replacement,
maintenance operations must be carried out by
professional staff.
• Louver Angle Memory (some units)
When turning on your unit, the louver will
automatically resume its former angle.
• Refrigerant Leakage Detection (some
units)
The indoor unit will automatically display "EC" or
"EL0C"or flash LEDS (some units) when it detects
refrigerant leakage.
• Sleep Operation
The SLEEP function is used to decrease energy
use while you sleep (and don't need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
And the Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F) after
1 hour, and will decrease an additional 1°C (2°F)
after another hour. The sleep feature will stop after
8 hours and the system will keep running with
final situation.
SLEEP Operation
SLEEP Operation
Cool mode (+1°C/2°F) per hour
Cool mode(+1 C/2 F) per hour
for the first two hours for the first two hours
Set
Set
temperature
temperature 1hr
Heat mode (-1°C/2°F) per hour
Heat mode( -1 C/2 F) per hour
for the first two hours for the first two hours
Saving energy during sleep
Saving energy during sleep
Split Type Air Conditioner / User Manual
Keep
Keep running
running
1hr