Advertisement
Upgrading RemotEye III Firmware from Windows via Network
Figure 7: Tugrade, RemotEye Upgrade Utility via Network
Toolbar ID
Icon Name
1
Set IP
2
Acquire
3
Browse
4
Add
5
Delete
6
Edit
7
Discover
8
Open file
9
Upgrade Firmware
To perform a firmware upgrade, RemotEye III must be connected to the same network as the workstation
from which the upgrade file is to be sent. In the RemotEye III make sure the Network Upgrade Control is
enabled, under RemotEye III Control, and that users have the Admin login string information and
Password.
Here is the way to manually Upgrade RemotEye Firmware:
1) Web Interface: Go to RemotEye III Management RemotEye III Control menu then Enable
Network Upgrade Control.
Note: To enable the Network Upgrade Control user has to change the security level to
administrator by logging in as Administrator.
2) Open the Tupgrade application software and click on the Discover icon. If no RemotEye devices
auto populate the list, press on the + icon and enter the IP, Username, and Password. If it still does
not appear check your network security and your computer firewall.
3) Select the check box right next to the RemotEye that will be updated.
4) Select the Edit button and enter the Username and Password.
5) Select the Open File button and select the firmware to be uploaded.
6) Select the Upgrade Firmware button to start the upgrade process.
7) When the upload is complete, the RemotEye will automatically reboot.
RemotEye III Quick Installation Guide – 63761-002
Table 1 Tupgrade Toolbar Functions
Description/Function
Manually set found device IP address, subnet mask and gateway
Get all device parameters. This generates a config file.
Use default browser to open homepage of selected device
Pop-up Add dialog to add one device
Delete one or more selected devices.
Pop-up Edit dialog to modify a device configuration.
Discover all RemotEye devices on the network.
Open the location (directory) of uploaded file.
Upgrade firmware after unit selected and file uploaded
5
Advertisement
