Advertisement
Enter a name and select an icon for the application at the Connection Dialog box.
Select a direct connection to an appropriate com port listed in the pull-down menu.
Ensure that the Properties dialog box is setup as follows:
Baud Rate —9600
Data Bits — 8
Parity — None
Stop Bits — 1
Flow Control —- None
Press [Enter] and the RemotEye III version and Password field will be displayed (See Figure 2).
Enter the password (default is "ADMIN") and press [Enter] to display the RemotEye III Main
Menu.
Default Password (case sensitive): ADMIN
+====================================================================+
|
[ TIC RemotEye III Login Menu ]
+====================================================================+
Enter Password: ******
Figure 2: Console Login Screen
The seven options provided in the RemotEye III Main Menu provide access to all system
RemotEye III configuration parameters. These options (see the Main Menu Description on
Figure 3: Console Main Menu) and their submenus are discussed in more detail in the next
section.
+====================================================================+
|
[ TIC RemotEye III Main Menu ]
+====================================================================+
1. TIC RemotEye Configuration
2. SNMP Communities
3. SNMPV3 USM Table
4. Trap Receiver Table
5. Reset Configuration To Default
6. Save and Exit
7. Save and Restart Agent
Please Enter Your Choice =>
Figure 3: Console Main Menu
2
RemotEye III Quick Installation Guide – 63761-002
|
|
Advertisement
