Copyright © 2010 Storage Appliance Corporation; Updating Clickfree Software; Resetting The C2N - Clickfree C2N 2.5 User Manual

Clickfree C2N Home Backup (Mac)
U C
PDATING LICKFREE SOFTWARE
From time to time Clickfree software is upgraded to provide new or enhanced features.
Clickfree automatically looks for updates when it is connected to your computer and you
have a connection to the Internet.
If you access the C2N over the network (using the BackupLink utility), updates are applied
the next time you start a backup.
To ensure automatic updates is enabled, make sure that the check box
is selected on the
for updates
clear this check box.
To check for updates manually,
1. On the Tools
2. If the software in your C2N and your computer is up to date, click
pops up.
If an update is available, it is downloaded and your software is updated.
While a software update is taking place, do not remove the C2N from your computer
and do not turn off or restart the computer until the update is complete.
3. When the software update is complete, you must unplug the C2N and plug it in again
for the update to take effect.
R C2N
ESETTING THE
Master Reset
backed up on your C2N, and to apply factory settings.
After you perform a
content, but your C2N can still be used for new backups.
If you want to remove only the content that was backed up from one user, see "Removing a
User" on page 20.
1. On the Tools
2. You are prompted to confirm that you want to remove all backed-up content from
Clickfree – select the check box and click
Once you have removed content from Clickfree using Master Reset there is no way to
Clickfree may take several minutes to erase all of the content, depending on the amount of
content backed up on the C2N.
Copyright © 2010 Storage Appliance Corporation.
Tools
window click Software Update
is used to remove all backed-up content from all computers that have been
Master Reset you can no longer restore any previously backed-up
window click Master Reset
recover any backed-up content from the C2N.
window. To stop checking automatically for updates,
. Clickfree checks for available updates.
.
Reset .
Frequently Asked Questions
Automatically check
OK on the dialog that
23