Sharp FP-GM50B Operation Manual page 33

Be sure to remove the power plug from the wall outlet.
UNIT
SENSORS
Dust sensor
Odor sensor
FILTERS
HEPA Filter
Tag
Deodorizing Filter
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
•Do not use volatile fl uids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
•Do not use detergents
Detergent ingredients may damage the unit.
1. Remove the Catch Panel.
2. Remove the Pre-fi lter.
3. Remove the Dust sensor fi lter.
4. If it is very dirty, wash it with water and
Dust sensor
fi lter
Gently remove dust from the odor sensor,
using a vacuum cleaner attachment or similar
Odor sensor
tool.
Gently remove dust from HEPA Filter and Deodorizing Filter with a
vacuum cleaner attachment or similar tool.
CAUTION
Do not WASH in water and DRY in the sun.
The fi lters are fragile, be careful not to apply too much force.
• HEPA Filter
Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the fi lter will be
damaged.
• Deodorizing Filter
The maintenance can be applied to the both sides.
dry it thoroughly.
E-13