Installation And Setup; Features - All Models - Metro DataVac TC90 Series Instructions For Use Manual

INSTALLATION AND SETUP

1. Check the packaging and cabinet for shipping damage after unloading the unit, and after removing all the packaging.
2. The receiver of this product is responsible for filing freight damage claims. This equipment must be opened immediately
for inspection. All visible damage must be reported to the freight company within 48 hours and must be noted on freight
bill at the time of delivery.
3. Concealed damage is your responsibility — you must advise the carrier of any loss or damage within 15 days after
receipt of the cabinet. If there is damage, retain the original packaging for inspectors.
4. Any protective covers (plastic or paper sheet) must also be removed before turning the cabinet on.
FEATURES — ALL MODELS
In order to utilize your new cabinet to its full potential; take a minute to identify the following features that have been provided
for your convenience.
• Cabinet is shipped in one carton.
• Temperature range is 120°F to 180°F.
• Analog type thermometer to allow temperature monitoring when unit is disconnected from power source.
• 15 amp service.
• 3 - 300 watt heating elements.
• Totally insulated with high temp rigid board fiberglass insulation.
• Kick latch for "hands-off" opening.
• Magnetic door latch.
• Adjustable hinges and strike.
• Removable slide racks.
• Stainless steel internal liner.
• Closed loop thermal break to reduce heat transfer.
• Outside shell brushed aluminum.
• Non-marking 5" neoprene casters (two with brakes).
• Side mounted lift handles.
• Adjustable door mounted vent.
TC90 SERIES INSULATED TRANSPORT CABINET — INSTRUCTIONS FOR USE
3
www.metro.com
L01-144
REV K 04/22