Vivotek TS6346-EHL User Manual page 67

JPEG
If the mode is selected, the Network Camera sends consecutive JPEG images to the client,
producing a moving effect similar to a filmstrip. Every single JPEG image transmitted guarantees
the same image quality, which in turn comes at the expense of variable bandwidth usage. Because
the media contents are a combination of JPEG images, no audio data is transmitted to the client.
There are three parameters provided in MJPEG mode to control the video performance:
■ Frame size
You can set up different video resolution for different viewing devices. For example, set a smaller
frame size and lower bit rate for remote viewing on mobile phones and a larger video size and
a higher bit rate for live viewing on web browsers. Note that a larger frame size takes up more
bandwidth.
■ Maximum frame rate
This limits the maximum refresh frame rate per second. Set the frame rate higher for smoother
video quality.
If the power line frequency is set to 50Hz, the frame rates are selectable from 1fps to 25fps. If the
power line frequency is set to 60Hz, the frame rates are selectable from 1fps to 30fps. You can
also select Customize and manually enter a value. The frame rate will decrease if you select a
higher resolution.
■ Video quality
Refer to the previous page setting an average or upper bound threshold for controlling the
bandwidth consumed for transmitting motion jpegs. The configuration method is identical to that
for H.264.
For Constant Bit Rate and other settings, refer to the previous page for details.
VIVOTEK
User's Manual - 67