Table of Contents
Advertisement
VIVOTEK
videoin_nresolution
videoin_resolution
videoin_maxframerate
videoin_mjpeg_maxframe
rate
videoin_h264_maxframer
ate
videoin_codec
videoin_streamcodec
videoin_flexiblebitrate
videoout_codec
224 - User's Manual
<positive integer>
0/7
A list of <WxH>
0/7
<product
dependent>
A list of <Integer>
0/7
A list of <Integer>
0/7
and "-"
A list of <Integer>
0/7
and "-"
mjpeg, h264, h265
0/7
<product
dependent>
A list of <Positive
0/7
Integer>
<boolean>
0/7
-, ntsc, pal
0/7
This equals
"capability_videoin_c0_nresolution".
* This is kept for compatibility.
This equals
"capability_videoin_c0_resolution".
* This is kept for compatibility.
This equals
"capability_videoin_c0_maxframerate".
* This is kept for compatibility.
This equals
"capability_videoin_c0_mjpeg_maxframerate
".
* This is kept for compatibility.
This equals
"capability_videoin_c0_h264_maxframerate".
* This is kept for compatibility.
Available codec of a device, split by comma.
The sequence is not limited.
EX:
FD8183 supports H.264 and MJPEG, then this
is "mjpeg,h264".
IP9171 supports H.264, MJPEG and H.265,
then this is "mjpeg,h264,h265"
This equals
"capability_videoin_c0_streamcodec".
* This is kept for compatibility.
Indicate whether to support
flexible bit rate control.
Current output information about video out.
1st element for 1st video-out, 2nd element for
2nd video-out, and so on. The number of
element depends on "capability_nvideooout".
"-": Video-out is not available
Advertisement
Table of Contents
