Table of Contents
Advertisement
dnr
eis
is_mode
is_strength
is_supportlevel
is_affect
0,1
0,1
eis,
dis,
-
<boolean>
0, <positive integer>
-,
"-" means no feature is affected.
* When "wdrpro"=0 and "wdrc"=0,
this must be "-"
0/7
0: Non-support 3D digital noise
reduction
1: Support 3D digital noise reduction
0/7
0: Non-support electronic image
stabilizer
1: Support electronic image stabilizer
0/7
Indicate the image stabilizer mode.
"eis": electronic image stabilizer
"dis": digital image stabilizer
"-": not support
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
0/7
0: Non-support tuning strength of
image stabilizer mode.
1: Support tuning strength of image
stabilizer mode.
* Only available when
"capability_image_c<n>_is_mode" is
not "-".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
0/7
Indicate the support strength level of
image stabilizer mode.
* Only available when
"capability_image_c<n>_is_mode" is
not "-".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
0/7
When Is mode is not "-", some
VIVOTEK
User's Manual - 245
Advertisement
Table of Contents
