Summary of Contents for Unfinished Furniture of Wilmington T-5454XBT
Page 1
ASSEMBLY INSTRUCTIONS Description : BUTTERFLY LEAF PEDESTAL TABLE Item No. : T-5454XBT AND T-10XB OR T-10XBG (PACKED IN SEPARATE BOX) ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED APR 15, 2015 - 1 -...
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Pedestal column ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED APR 15, 2015 - 2 -...
STEP 1 Attach the legs (C) to the pedestal (B) with washers (2) and (1) and nut (3), as shown below. Tighten with the wrench (4). ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam (PACKED IN SEPARATE BOX)
Page 4
Place the plate on top of the pedestal (B), attach with washers (6), and (2) and nuts (3). Tighten with the Wrench (4) as shown below. ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam (PACKED IN SEPARATE BOX)
Page 5
STEP 5 Unlock the table top from both sides underneath the top as shown below. Pull the 2 parts of the table top apart. ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED APR 15, 2015...
Page 6
Place the butterfly leaf in the center of the open table top. Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below. ITEM NO.: T-5454XBT AND T-10XB OR T-10XBG Printed in Vietnam...