OPERATION A big advantage of the ZP-43 SLIM/2 X system is the very easy and user-friendly operation. All connections are ergonomically designed and arranged in a very clear and easy-to-understand manner.
10.- TX1 and TX2 LED DISPLAY Two digital radio receivers are installed in the procession system ZP-43 SLIM/2 X: the LED TX1 shows the active radio link of the first radio receiver, the second LED TX2 shows the active connection of the second radio receiver.
Page 7
After pressing this switch, the device is ready for operation. The green LED indicator lights up when the device is switched on (POWER ON). The ZP-43 SLIM/2 X procession system can also be connected to the charger (charging process active) during operation.
Page 8
On the lower part of the procession system there is a flange with a diameter of 35 mm for the tripod / stand mount. Thus, the ZP-43 SLIM/2 X procession system can also be used as a stationary system in your church or outside for open air church services.
Page 10
HORIZONTAL ALIGNMENT OF THE SPEAKERS The upper speaker segment in the ZP-43 SLIM/2 X procession system can be rotated in the horizontal plane and is used to optimally align the sound radiation of the speakers to the desired area to be covered with sound.
IMPORTANT: Only one transmitter can be paired with a receiver located in the procession system. That means that e.g. in all ZP-43 SLIM/2 X systems up to two transmitters (hand-held transmitter and/or bodypack) wireless microphones can be operated simultaneously after coupling.
Page 15
RF spectrum at any time (500 MHz, 600 MHz or 800 MHz frequency range, depending on the model). Meaning of the device designation based on the models „ZP-43 SLIM/2 X 500-2MC“ or „ZP-43 SLIM/2 X 500-MCBP“ or „ZP-40 SLIM/2 X 500-2BP“:...
Need help?
Do you have a question about the ZP-43 SLIM/2 X and is the answer not in the manual?
Questions and answers