Table of Contents
Advertisement
PB 36CF ST - Fireplace Preparation
WARNING: In order to extract the heat properly from around the firebox, you must remove (3) layers of cover
plates for each of the flex attachment points on the top of the fireplace. Not removing all of the cover
plates can create hazardous conditions.
1
Remove the knockouts
from the top of the
fireplace. Use snips or
diagonal cutters to snip
the tab on the
knockouts. Press on the
far side away from the
tap to pop the edge of
the knockout up.
2
Grab on to the knockout
with pliers and bend it
back and forth until the
remaining tabs break
free. Discard the knock-
out plate. Repeat with
the second knock-out.
3
Under each knock out
plate, you will find a
cover plate held in place
with (2) ¼" screws. Use
a nut driver or drill with
an extension to remove
the (2) screws. Reach
in and remove the cover
plate. You may discard
the plates.
4
Under each knock-out
plate, you will find
another small circular
cover plate held in place
with (2) ¼" screws.
Reach in and remove
the cover plate. You
may discard the plates.
Page 13 of 44
CoolSmart TV
PB24CF, PB36CF, PB36CF ST
564 25K, 564 35K, 3615HO
(sku# 98900778)
17602034- 9/8/22
© Travis Industries, Inc.
Advertisement
Table of Contents
