Download Print this page
Forging Mount HY9397-B Instruction Manual

Forging Mount HY9397-B Instruction Manual

Advertisement

Quick Links

Instruction Manual
FULL-MOTION LONG ARM
TV WALL MOUNT
Model HY9397-B
1/2 in.
(13 mm)
Electric
Tape
Socket
Measure
Pencil
Screwdriver
Drill
Wrench
7/32 in.
( 5 mm)
Wood
Hammer
Stud Finder
Awl
Drill Bit
STEP 1-1
Select TV Screw Diameter
STEP 1-2
If your TV has a flat back, AND you want your TV closer
Hand thread screws into the threaded inserts
on the back of your TV to determine which
to the wall, use the shorter screws
M6, or M8
screw diameter (
) to use.
Use the spacers and longer s crews
M6
M8
A
Does your TV (including accessories)
weigth more than 132 lbs. ( 60 kg )?
No
— Perfect!
Y
es
— This mount is NOT compatible.
WARNING
capacity can result in serious personal
injury or damage to equipment! It is the
installer's responsibility to make sure the
weight of the TV (with accessories) does
not exceed 132 lbs ( 60 kg ).
WARNING:
This product
contains small items that could
be a choking hazard if swallowed.
Before starting assembly,
verify all parts are included
and undamaged. If any parts
are missing or damaged, do
not return the damaged item to
your dealer; contact Customer
Service.
Never use damaged parts!
3/8 in.
(10 mm)
NOTE: Not all parts and
Concrete
Drill Bit
hardware included will be used.
Select TV Screw Length
(
,C) .
A
(
B,D,E,F)to accommodate
· Round/irregular back TVs
· TVs with inset mounting holes
· Extra space needed for cables
B
FLAT BACK
ROUND BACK
INSET HOLES
CABLES
What is your wall made of?
132 lbs.
Perfect!
(60 kg)
:
Exceeding the weight
Solid concrete or
conc et block?
Arm and Wall Plate
TV Bracket
02
x2
TV plate
03
x1
01
x1
wallplate template Level
HDMI Cable
VELCRO TIE
04
05
07
x1
x1
06
x1
x5
Specification Sheet
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
you can contact at:
forgingmount888@163.com
CAUTION
:
Verify
adequate thread
engagement with the screw/
washer/spacer combination
AND TV bracket .
- Too sho will not hold the TV.
rt
- Too long will damage the TV.
Too Short
Correct
Too Long
Please read
through these instructions completely to be sure you're comfortable with
this easy install process. Also check your TV owner's manual to see if there are any
Drywall with
special requirements for mounting your TV.
woo studs?
d
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please contact US via: forgingmount888@163.com
CAUTION:
Avoid potential personal injuries and property damage!
This product is designed for use in wood stud/concrete walls DO NOT install into drywall
The wall must be capable of supporting ve times the weight of the TV and mount combined
r
e
Do not use this product for any purpose not explicitly speci ed by manufacturer
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
[Only one size fits your TV]
Hardware for Attaching TV Bracket to TV
(qty. 4 each)
TV Screws
Washer
M6
M6 x 15mm
M6 x 35mm
M6/M8
A
B
(qty. 4)
M8
M8 x 16mm
M8 x 45mm
C
E
J
M8 x 30mm
M8 x 65mm
D
F
Hardware for Attaching the Arm
Assembly and Wall Plate to Wall
Spacers
[If necessary]
Lag Bolts
Safety Lock
2.5 mm
(qty. 8)
5/16x2.75"
N X2
G
K
x5
Lag Bolt
10 mm
Wrench
Washers
(qty. 4)
H
O X1
22 mm
M
x5
(qty. 4)
CAUTION!
concrete anchor
I
These anchors ar e f or
c onc rete or b ric k walls
ONLY. DO NOT use them
L
x5
in drywall or wood studs.

Advertisement

loading
Need help?

Need help?

Do you have a question about the HY9397-B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Forging Mount HY9397-B

  • Page 1 It is the Do not use this product for any purpose not explicitly speci ed by manufacturer fi Model HY9397-B installer's responsibility to make sure the ● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use weight of the TV (with accessories) does not exceed 132 lbs ( 60 kg ).
  • Page 2 STEP 2 Wall Plate Install( Wood Stud ) 3 in. (75mm) Level 1 6 i n CAUTION: Avoid potential personal injuries ( 4 0 6 and property damage! m m ) 7/32 in. ● Drywall covering the wall must not exceed (5.5 mm) 5/8 in.