Electro-Voice EVERSE 8 User Manual page 43

EVERSE 8
–
2.
3.
4.
5.
MIX OUT menu
The MIX OUT menu is used to select which signal(s) should be output at MIX OUT and which
signal should be delivered by the loudspeaker.
–
–
–
BLUETOOTH menu
The BLUETOOTH menu is used to set the Bluetooth® functionality of the loudspeaker.
ON/OFF - The ON/OFF menu controls whether Bluetooth® functionality is enabled or disabled
on the loudspeaker.
CONTROL PAIR - The CONTROL PAIR menu is used to enable the QuickSmart Mobile app
wireless control and monitoring application. Available options for this selection are: ON or
OFF.
The default is OFF.
AUDIO PAIR - The AUDIO PAIR menu is used to stream audio from your Bluetooth® enabled
device to the loudspeaker system. Available options for this selection are: PAIRING, ON or
OFF.
The default is OFF.
LINK SPEAKERS
The LINK SPEAKERS function allows two EVERSE loudspeakers to be linked over Bluetooth®
in true wireless stereo.
To link two EVERSE loudspeakers:
1.
2.
3.
4.
Electro-Voice
Do not cup the microphone element with your hands while speaking or singing. Only hold
the microphone by the handle or body as per the microphone manufacturer's
recommendation.
Enable automatic feedback suppression (AFS) in the DSP control menu or FX section of
the QuickSmart Mobile app. This will enable AFS on INPUT 1 and INPUT 2.
Slowly turn up the output of the loudspeaker, and begin sound checking your microphone
or instrument.
As you hear feedback, allow a few seconds for the automatic feedback suppression (AFS)
to detect and to reduce the feedback.
Continue sound check until no additional feedback tones are generated.
L+R - The left and right signals of all inputs are summed. The sum is output at MIX OUT
and is delivered by the loudspeaker (default).
L - Only the panned left signal of all inputs is output at MIX OUT. The loudspeaker will
deliver only the right signal.
R - Only the panned right signal of all inputs is output at MIX OUT. The loudspeaker will
deliver only the left signal.
Pair one of the EVERSE loudspeakers via Bluetooth® to a mobile device. Refer to Pairing
the QuickSmart Mobile app, page 17 for pairing instructions.
In both EVERSE loudspeakers, navigate to the BLUETOOTH menu in the Main DSP menu.
In both EVERSE loudspeakers, select LINK SPEAKERS.
The LCD display will show LINKING SPEAKERS... while establishing connection between
both EVERSE loudspeakers. When the connection is established, the menu will display
UNLINK SPEAKERS.
In the BLUETOOTH menu below the LINKING SPEAKERS, the stereo channel selection
will appear.
Select the appropriate stereo channel selection for each EVERSE loudspeaker: L+R
(mono), L, or R.
Note: This is stereo image from the audience's perspective, also known as House L & R.
User manual
Amplifier DSP | en 43
2022-10 | 02 | F.01U.401.530