Kyocera KR2 User Manual page 5

PPTP Server IP Address: The ISP provides this parameter, if necessary. The value may
be the same as the Gateway IP Address.
Reconnect Mode: Typically PPTP connections are not always on. The router allows you
to set the reconnection mode. The settings are:
•
Always on: A connection to the Internet is always maintained.
•
On demand: A connection to the Internet is made as needed.
•
Manual: You have to open up the Web-based management interface and click
the Connect button manually any time that you wish to connect to the Internet.
Maximum Idle Time: Time interval the machine can be idle before the PPTP connection
is disconnected. The Maximum Idle Time value is only used for the "On demand" and
"Manual" reconnect modes.
L2TP
L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your
ISP. This method of connection requires you to enter a Username and Password
(provided by your Internet Service Provider) to gain access to the Internet. The supported
authentication protocols are PAP and CHAP.
Dynamic IP: If the ISP's servers assign the router's IP addressing upon establishing a
connection, select this option.
Static IP: If your ISP has assigned a fixed IP address, select this option. The ISP
provides the values for the following fields: L2TP IP Address, L2TP Subnet Mask , and
L2TP Gateway IP Address.
L2TP Server IP Address: The ISP provides this parameter, if necessary. The value may
be the same as the Gateway IP Address.
Reconnect Mode: Typically L2TP connections are not always on. The router allows you
to set the reconnection mode. The settings are:
•
Always on: A connection to the Internet is always maintained.
•
On demand: A connection to the Internet is made as needed.
•
Manual: You have to open up the Web-based management interface and click
the Connect button manually any time that you wish to connect to the Internet.
Maximum Idle Time: Time interval the machine can be idle before the L2TP connection
is disconnected. The Maximum Idle Time value is used for the "On demand" and
"Manual" reconnect modes.
The following options apply to all WAN modes.
5 of 72