Kyocera KR2 User Manual page 17

IP Address
The IP address of the system on your internal network that will provide the virtual service,
for example 192.168.0.50. You can select a computer from the list of DHCP clients in the
"Computer Name" drop-down menu, or you can manually enter the IP address of the
server computer.
Protocol
Select the protocol used by the service. The common choices -- UDP, TCP, and both
UDP and TCP -- can be selected from the drop-down menu. To specify any other
protocol, select "Other" from the list, then enter the corresponding protocol number
assigned by the
Private Port
The port that will be used on your internal network.
Public Port
The port that will be accessed from the Internet.
Schedule
Select a schedule for when the service will be enabled. If you do not see the schedule
you need in the list of schedules, go to the
schedule.
Inbound Filter
Select a filter that controls access as needed for this virtual server. If you do not see the
filter you need in the list of filters, go to the
a new filter.
Save/Update
Record the changes you have made into the following list.
Clear
Re-initialize this area of the screen, discarding any changes you have made.
Virtual Server List
This is a list of the defined Virtual Servers. Click the Enable checkbox at the left to
directly activate or de-activate the entry. An entry can be changed by clicking the Edit
icon or can be deleted by clicking the Delete icon. When you click the Edit icon, the item
is highlighted, and the "Edit Virtual Servers" section is activated for editing.
IANA) in the Protocol box.
17 of 72
Tools → Schedules screen and create a new
Advanced → Inbound Filter
(as
screen and create