Kyocera KR2 User Manual page 49

IGMP Multicast memberships
If IGMP is enabled, this area of the screen shows all multicast groups of which any LAN
devices are members.
WIRELESS (WI-FI)
The wireless section allows you to view the wireless clients that are connected to your wireless
router.
MAC Address
The Ethernet ID (MAC address) of the wireless client.
IP Address
The LAN-side IP address of the client.
Mode
The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n for
802.11a, 802.11b, 802.11g, or 802.11n respectively.
Rate
The actual transmission rate of the client in megabits per second.
Signal
This is a relative measure of signal quality. The value is expressed as a percentage of
theoretical best quality. Signal quality can be reduced by distance, by interference from
other radio-frequency sources (such as cordless telephones or neighboring wireless
networks), and by obstacles between the router and the wireless device.
If Require User Login is enabled then you can also control internet access privileges for the
attached wireless clients.
ROUTING
The routing section displays all of the routing details configured for your router.
A value of 0.0.0.0 for gateway means there is no next hop, and the IP address is directly
connected to the router on the interface specified: LAN or WAN. A value of 0.0.0.0 in both the
destination IP and netmask means that this is the default route.
LOGS
The router automatically logs (records) events of possible interest in its internal memory. If there
is not enough internal memory for all events, logs of older events are deleted, but logs of the
latest events are retained. The Logs option allows you to view the router logs. You can define
what types of events you want to view and the level of events to view. This router also has
external Syslog Server support so you can send the log files to a computer on your network that
is running a Syslog utility.
49 of 72