Email Settings - Kyocera KR2 User Manual

Automatic Time Configuration
Enable NTP Server
Select this option if you want to synchronize the router's clock to a Network Time Server
over the Internet. If you are using schedules or logs, this is the best way to ensure that
the schedules and logs are kept accurate.
Note that, even when NTP Server is enabled, you must still choose a time zone and set
the daylight saving parameters.
NTP Server Used
Select a Network Time Server for synchronization. You can type in the address of a time
server or select one from the list. If you have trouble using one server, select another.
Set the Date and Time Manually
If you do not have the NTP Server option in effect, you can either manually set the time
for your router here, or you can click the Copy Your Computer's Time Settings button
to copy the time from the computer you are using. (Make sure that computer's time is set
correctly.)
Note: If the router loses power for any reason, it cannot keep its clock running, and will not have
the correct time when it is started again. To maintain correct time for schedules and logs, either
you must enter the correct time after you restart the router, or you must enable the NTP Server
option.
SYSLOG
This section allows you to archive your log files to a Syslog Server.
Enable Logging to Syslog Server
Enable this option if you have a syslog server currently running on the LAN and wish to
send log messages to it.
Syslog Server IP Address
Enter the LAN IP address of the Syslog Server.

EMAIL SETTINGS

The Email feature can be used to send the system log files, router alert messages, and firmware
update notification to your email address.
Enable
Enable Email Notification
When this option is enabled, router activity logs or firmware upgrade notifications can be
emailed to a designated email address, and the following parameters are displayed.
42 of 72