Kyocera KR2 User Manual page 43

Email Settings
From Email Address
This email address will appear as the sender when you receive a log file or firmware
upgrade notification via email.
To Email Address
Enter the email address where you want the email sent.
SMTP Server Address
Enter the SMTP server address for sending email.
Enable Authentication
If your SMTP server requires authentication, select this option.
Account Name
Enter your account for sending email.
Password
Enter the password associated with the account.
Verify Password
Re-type the password associated with the account.
Email Log When Full or on Schedule
On Log Full
Select this option if you want logs to be sent by email when the log is full.
On Schedule
Select this option if you want logs to be sent by email according to a schedule.
Schedule
If you selected the On Schedule option, select one of the defined schedule rules. If you
do not see the schedule you need in the list of schedules, go to the
screen and create a new schedule.
Note: Normally email is sent at the start time defined for a schedule, and the schedule
end time is not used. However, rebooting the router during the schedule period will cause
additional emails to be sent.
43 of 72
Tools → Schedules