Kyocera KR2 User Manual page 41

Remote Admin Port
The port that you will use to address the management interface from the Internet. For
example, if you specify port 1080 here, then, to access the router from the Internet, you
would use a URL of the form: http://my.domain.com:1080/.
Use HTTPS
Setting this option requires all remote administration to use the Secure HTTP (HTTPS)
protocol. For example, if you specify port 1080 above, then, to access the router from the
Internet, you would use a URL of the form: https://my.domain.com:1080/.
Remote Admin Inbound Filter
Select a filter that controls access as needed for this admin port. If you do not see the
filter you need in the list of filters, go to the
a new filter.
TIME
The Time Configuration option allows you to configure, update, and maintain the correct time on
the router's internal system clock. From this section you can set the time zone that you are in and
set the Time Server. Daylight saving can also be configured to automatically adjust the time when
needed.
Time Configuration
Current Router Time
Displays the time currently maintained by the router. If this is not correct, use the
following options to configure the time correctly.
Time Zone
Select your local time zone from pull down menu.
Enable Daylight Saving
Check this option if your location observes daylight saving time.
Daylight Saving Offset
Select the time offset, if your location observes daylight saving time.
DST Start and DST End
Select the starting and ending times for the change to and from daylight saving time. For
example, suppose for DST Start you select Month="Oct", Week="3rd", Day="Sun" and
Time="2am". This is the same as saying: "Daylight saving starts on the third Sunday of
October at 2:00 AM."
Advanced → Inbound Filter
41 of 72
screen and create