Making a Test Print
Making a test print from the copier's operation panel
Perform this procedure in order to send a test print command from
the copier's operation panel.
1
Press the * / Language key.
Use the N and M cursor keys to move the arrow (e) to
2
"Default set/admin".
3
Press the Enter key.
4
Use the numeric keys to enter your PIN code. (The factory
default code is "4850".)
5
Use the N and M cursor keys to move the arrow (e) to
"Printer setting".
6
Press the Enter key.
7
Use the N and M cursor keys to move the arrow (e) to
"Test print".
8
A test print will be made automatically.
Chapter 3 Operating a Copier with the Scanner/Plotter System(E) Installed
3-5