Table of Contents
Advertisement
The packaging procedure is as follows.
1) Put the probe into TYVEK pouch.
2) Seal the TYVEK Pouch using a heat
sealer. Ensure that the seal is
complete.
3) Put the sealed pouch into a tray or
plastic mesh wire for
sterilization.
Attachment
Fig. 19
in the pouch
TYVEK
Pouch
Attachment
Fig. 20
Tray for
sterilization
Fig. 21
tray
-22-
Probe
TYVEK Pouch
Packaging
Sealed
Probe
Sealing
Probe in
the Pouch
Packaging in a
Q1E-EP0325
Advertisement
Table of Contents
