Hitachi EUP-V53W Instruction Manual page 17

c) Attach the Magnetic sensor attachment to the probe as shown in Fig.10.
Fig.10
Do not put your fingers between the Magnetic Sensor Attachment and the
Probe when attaching the Magnetic sensor attachment to the probe.
4.1.2. How to release Magnetic sensor
The procedure of releasing Magnetic sensor is as follow.
1) Detach the Magnetic sensor attachment from the probe as shown Fig.11.
2) Detach the magnetic sensor and the Spacer for EZU-RV2S from the
Magnetic sensor attachment as shown Fig. 12.
Fig. 12
from the Magnetic sensor attachment
Clean, disinfect and sterilize the Magnetic sensor attachment and the
Spacer for EZU-RV2S before the first use as there are not sterilized
in the factory.
How to attach the Magnetic sensor attachment
Fig.11 How to release the Magnetic
sensor attachment from the probe
How to release magnetic sensor
CAUTION
CAUTION
-11- Q1E-EP0325