Hitachi EUP-V53W Instruction Manual page 20

4.2.2. How to release Magnetic sensor
The procedure of releasing Magnetic sensor is as follow.
1) Detach the Magnetic sensor attachment from the probe as shown Fig.16.
Fig.16
sensor attachment from the probe
2) Detach the magnetic sensor and the Spacer for EZU-RV3S from the
Magnetic sensor attachment as shown Fig. 17.
Fig. 17
from the Magnetic sensor attachment
Clean, disinfect and sterilize the Magnetic sensor attachment before
the first use as there are not sterilized in the factory.
How to release the Magnetic
How to release magnetic sensor
CAUTION
-14- Q1E-EP0325