Problems With Image Size And Position; Print Quality Problems - Kyocera Ci1000 Operating Instructions Manual

7
7-35 Troubleshooting
Make sure that the media is installed under the hooks at the front of the media
tray.
Do not overfill the media tray, as indicated by the red line on the right side of the
tray.
Clean the paper-pick rollers (see page 7-1 for directions).
Make sure that the media thickness switch is set correctly for the installed media
(see page 2-11).

Problems with image size and position

Trouble:
Off-set images.
Cut-off images.
Corrective Action:
Check your application for correct image sizing.
Check your application for image sizing.
Make sure that the correct size media is in the media tray.

Print quality problems

Trouble:
Prints have dull, faded colors.
Image is very faded or pieces of the image are missing; toner on the page is loose.
Streaks or spots