Kyocera Ci1000 Operating Instructions Manual page 186

8
8-2 Options and Supplies
T
O REMOVE THE VIDEO CONTROLLER BOARD
1. Turn the printer OFF, unplug the power cord and disconnect any cables connected
2. Loosen the two screws that secure the video controller board to the back of the
3. Carefully pull the video controller board out of its slot in the printer.
Video controller board
to the connectors on the back of the printer.
printer.
Illustration to be provided
For instructions on installing printer options see:
• Installing a hard disk drive on page 8-4
• Installing additional memory on page 8-7
• Installing network cards on page 8-9
:
Illustration to be provided