Instructions For Lanconfig - Lancom 821+ Manual

LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721 VPN
Chapter 5: Linking two networks
5.2

Instructions for LANconfig

Perform the configuration on both routers, one at a time.
Ping – quick testing for TCP/IP connec-
tions
To test a TCP/IP connection, simply send a
ping from your computer to a computer in
the remote network. For more information
on the 'ping' command, please see the doc-
umentation of your operating system.
IPX and NetBIOS connection can be tested
by searching for a remote Novel Server or a
computer in the remote Windows work-
group from your computer.
46
Launch the 'Connect two local area networks' wizard. Follow the wizard's
instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Finish.
After finishing the configuration of both routers, you can test the network
connection. Try to contact a computer in the remote LAN (e.g. with a
ping). The LANCOM Router should automatically set up a connection to
the remote station and contact the required computer.