Wr5D Details - Intelligent LLEVO-W Manual

2.2 WR5D, WR20D, WR20D‐2, WR20D‐EM Details
2.2.1 WR5D Details

Mount on junction box with ½" knock out or directly to fixture

The WR5D Wireless Relays is designed for up to a 5 Amp load.

Connect all Line/Load and Neutral wires, plus 0‐10VDC control wires as shown above,
cap all unused leads.

Press the Wireless Link/Test button to toggle the relay, LED status should light green for relay on.

The WR5D can direct link to LSG3‐W switches or to the LLEVO‐W for networking.
Electrical:
1 Load with Dimming
5Amps, 120/277 VAC LED/Electronic Operating Temp: 0‐50 deg. C
5Amps, 120/277 VAC Tungsten
1/4HP @ 120VAC Motor Load
50mA Sink for 0‐10V Dimming
600VAC rated dimming leads
Operating Environment:
Location: Interior
Humidity: 10‐90% Non‐Condensing Load Output = Blue
Atmosphere: Non‐Explosive/Corrosive 0‐10VDC (+) = Purple
Vibration: Stationary
Page 8 of 25
Wire Color Guide:
Neutral = White
Line Input = Black
0‐10VDC (‐) = Pink