Lightsync G3 Wireless; Features - Intelligent LLEVO-W Manual

1.4 LightSync G3 Wireless
The LightSync Digital G3 Wireless Switch (LSG3‐W) can connect to ILC wireless relays in direct link mode or to the
LLEVO‐Wireless controller for networking. The LSG3‐W is provided in all the standard G3 switch types. The MZD and
Scene switch dimming buttons support Press‐and‐Hold Ramp‐Up/Ramp‐Down dimming. Holding a zone button on an
MZD will allow a user to select that zone for individual dimming. Scene buttons set a dimming scene, holding the scene
button will capture the current dimmer levels to the scene. The Scene/MZD combo switch provide both operations in
one device. LSG3‐W digital switch stations provide control of wireless relays and wired relays over the ILC network
when linked to an EVO‐W controller in the ILC network.
1.4.1 Features

Made in USA

Digital 915Mhz radio communication with 50‐foot line of sight range

10 Year lithium battery

Direct Link to wireless relays or networked with EVO‐W controller

Unique ID radio transmit code per switch station

Wireless switch station for control of any relay, group of relays, dimmers, scene,
or preset

Non‐Dim 1 to 7 button control configurations

MZD ‐ Multi‐Zone Dimming for up to 6 zones with All‐Off

Scene Switch with dimming for up to 5 scenes with Off

Scene/Multi‐Zone with dimming combo for up to 4 Scene's or Zone's
(2S/4Z, 3S/3Z or 4S/2Z)

Scene Capture operation for all stations with scene buttons

Press and Hold dimming operation with raise and lower buttons for ramp‐up
and ramp‐down dimming

Laser engraving is provided, and custom engraving is available

Black and Red button stations are pad‐printed

Color Change Kit available for White, Ivory, Gray, Red and Black

Internal Configuration can be changed at the switch

Decora® style single‐gang switch plate available upon request
Page 6 of 25