Section 1 Lightleeder Wireless Product Description; Overview; Lightleeder Evo Wireless Controller; Features - Intelligent LLEVO-W Manual

Section 1 LightLEEDer Wireless Product Description
1.0 Overview
The ILC LightLEEDer Warless products provide both the ability to be "Direct Linked" for stand‐alone operation in a
single office or networked using a LightLEEDer EVO‐W controller that can control multiple spaces. The LightLEEDer
product line includes the LLEVO‐W controller, the WR5D 5Amp single load relay with dimming, the WR20D and
WR20D‐2 that are both 20Amp load rated with dimming for a one or two independent loads, the WR20D‐EM device
that has a 20Amp rated relay with dimming for the normal power load and includes an integrated 20Amp rated
Emergency relay with dimming output all in a single package.
1.1 LightLEEDer EVO Wireless Controller
The LightLEEDer EVO‐Wireless controller (LLEVO‐W) is a distributed lighting control panel that simplifies installation
and connects with ILC wireless relays, LSG3‐W switches, occupancy, and photocell sensors. The LLEVO‐W controller
provides all the same control options as a standard wired EVO controller, with the enhanced wireless radio connection
to inputs and outputs.
1.1.1 Features

Made in USA

915Mhz radio communication with 50‐foot line of site distance

Distributed lighting controller

Digital CAT‐5 connection to ILC panel network

Link up to 64 wireless relays

Link up to 64 wireless LSG3‐W switches or sensors

Push button with status LED to sweep relays

Standalone or networked with any LightLEEDer controller

Time clock includes 7/365‐day calendar, Daylight Savings Time, Astronomic, Open/Close

RJ45 connectors for networking with other LightLEEDer panels

Enclosure, suitable for plenum mounting
1.2 Wireless Relays
The LightLEEDer Wireless Remote Relays are designed to be mounted at the power junction box or lighting future for
direct control of the lighting load. Wireless relays come with
1‐load , or 20 Amp 2‐load configurations. The relays utilize latching contacts for low power consumption and are rated
for handling high LED inrush. Communication is done over the 915 MHz radio frequency, and allows for both direct link
and networked applications.
0‐10V dimming and are available a 5 Amp 1‐load, 20 Amp
Page 4 of 25