Accessories; Reliant Scale Rls6; Removing The Hanger Bar - Invacare Reliant 450 User Manual

11 Accessories

11.1 Reliant Scale RLS6

The Reliant Scale is a compact precision scale system designed specifically for the Invacare patient lift system.
DANGER!
Risk of Death, Injury or Damage
-Improper use of this product may cause death, injury or damage.
-If you are unable to understand the warnings, cautions, or instructions, contact a healthcare professional, dealer, or
technical personnel before attempting to use this equipment.
-DO NOT use this product or any available optional equipment without first completely reading and understanding these
instructions and any additional instructional material such as user manuals, service manuals or instruction sheets
supplied with this product or optional equipment.

11.1.1 Removing the Hanger Bar

1. Remove the shoulder bolt, locknut, pinch guard, and washer that secure the hanger bar to the hanger bar bracket.
Note the hanger bar hardware varies. For more information, see 10.6 Replacing the Hanger Bar, page 55.
Save the shoulder bolt to secure the Reliant Scale to the boom. The pinch guard will not be used when the scale is
installed. Save the pinch guard for future use of the hanger bar without the scale.
Removing the hanger bar hardware will release the hanger bar, two nylon washers and the hanger bar pin. Save the
hanger bar pin and the two nylon washers for future use of the hanger bar without the scale.
1078987-O
11 Accessories
60