Replacing The Casters And Forks; Replacing The Rear Casters - Invacare Reliant 450 User Manual

Invacare® Reliant™ 450/600

10.8 Replacing the Casters and Forks

10.8.1 Replacing the Rear Casters

1. Place the lift on its side.
2. Remove the bolt and locknut that secure the existing rear caster to the fork.
The bushing will be loose and may fall out of the caster. The existing
bushing will be reused. Examine and replace the bushing if it is worn.
3. Install the new/existing bushing into the new rear caster.
4. Align the mounting holes in the new rear caster and the fork.
5. Install the bolt through the fork and new rear caster and tighten securely with
the locknut.
58
Fig. 10-6
1078987-O