Advertisement
Quick Links
Communications Systems - PVA-1EB Call station emergency button
PVA-1EB
Call station emergency button
PAVIRO
The PVA-1EB is an optional emergency button for
installation in the PAVIRO call stations. For more
information, refer to the call station manual.
Certifications and approvals
Emergency standard certifications
Europe
EN 54‑16
Emergency standard compliance
UK
BS 5839-8
Austria
ÖNORM F 3033
Environmental directive compliance
Safety
EN62368-1
Immunity
EN 50130-4
Emissions
EN 61000-6-3
ICES-003
FCC-47 part 15B class A
Environment
EN 50581
Maritime
EN 60945
Conformity
Europe
CE/CPR
Australia
RCM
u Alarm button for call station
u EN 54-16 system certification
Conformity
Environment
RoHS
Installation/configuration notes
Labeling
1. Remove button ➊ from housing ➋
2. Remove red diffusor ➌ from lens ➎ using a sharp
tool (such as a knife)
3. Label the film insert ➍
4. Re-assemble the button including the film insert
and mount into the housing ➋
Advertisement
Related Manuals for Bosch PVA-1EB
Summary of Contents for Bosch PVA-1EB
- Page 1 Communications Systems - PVA-1EB Call station emergency button PVA-1EB Call station emergency button PAVIRO u Alarm button for call station u EN 54-16 system certification The PVA-1EB is an optional emergency button for Conformity installation in the PAVIRO call stations. For more...
- Page 2 Communications Systems - PVA-1EB Call station emergency button 2 | 3 Assembly in call station 1. Disconnect the call station from all connectors. 2. Unscrew the call station baseplate (4 screws ➊). 3. Carefully remove the baseplate from the upper part, start on the top left corner of the call sta- tion.
- Page 3 Communications Systems - PVA-1EB Call station emergency button 3 | 3 Environmental Operating temperature -5 °C to +45 °C (+23 °F to +113 °F) Storage and transport temperature -25 °C to +70 °C (-13 °F to +158 °F) Humidity (non-condensing) 5% to 90% Altitude Up to 2000 m...