NRS Healthcare M0122 User Instructions

General safety Warning
Please ensure these instructions are fully read
and implemented. Failure to do so may result
in injury. Retain these instructions in a safe
place for future reference.

1.0 Intended Use

The Kettle Tipper is an aid to help take the
strain off your wrists and to avoid the need to
lift heavy kettles full of water. It is suitable for
most jug kettles of about 1 to 2 litres.

2.0 Safety Precautions

Ensure kettle is securely fastened in tipper
before use.
It is advised to always leave the kettle on the
tipper and use a small jug to fill with water to a
recommended maximum of ¾ full.
Position the kettle tipper away from sources of
heat.
Take care to keep fluids away from electrical
sources.

3.0 Unpacking

Remove all packaging and check the product
is not damaged. Any suspected faults should
immediately be reported to the supplier and the
product taken out of action.
User Instructions
M0122 Cordless Kettle Tipper

4.0 Installation

Fit the tilt plate to the main framework by
hooking over the frame.
Secure the kettle base onto the tilt plate
using the clamps and wing nuts provided.