NETGEAR MBRN3000 User Manual page 94

Mobile Broadband Wireless-N Router MBRN3000 User Manual
Factory Default Settings
You can use the Restore Factory Settings button that is located on the bottom of your router to
reset all settings to tehir factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory
configiuration settings that are shown in the following table.
Feature
Router Login
User login URL
User name (case sensitive)
Login password (case sensitive)
Internet Connection
WAN MAC address
WAN MTU size
Port speed
Local Network (LAN)
LAN IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight saving
time
Firewall
A-2
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use default address
1492
AutoSense
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
PST for North America, GMT for other locations
Disabled
Technical Specifications and Factory Default Settings
v1.0, October 2009