Chapter 8. Decommissioning
Before disconnecting the MBDC-200 unit please follow the rules in the section called
"Safety Precautions".
Disconnecting
1. Ensure that the system power and external supplies have been turned off.
2. Disconnect power supply plug.
3. Disconnect all I/O cables.
4. Remove the MBDC-200 from the DIN rail following the procedure described in the
section called "DIN rail mounting and removal".
Disposal
This product must be disposed of at a specialized electronic waste recycling facility.
Do not dispose of in domestic waste.
UMMBDC200-2201
Decommissioning
31