Table of Contents
Advertisement
Reset to factory defaults
This alarm indicates that the device' configuration data was reset to factory defaults.
The device requires re-commissioning.
Modbus connection status
The Modbus Status page shows status and statistics about the Modbus traffic. These
values provide valuable information used to troubleshoot Modbus network problems.
This page is automatically updated every 5 seconds.
Figure 5.3: Modbus status page
This page shows accumulated readings since the MBDC-200 was last activated or
reset. If power to the MBDC-200 is lost, all cumulative values are reset to zero.
The following statistics are maintained:
TCP status
Status of the TCP/IP connection as per TCP finite state machine (refer to RFC 793).
If no client is connected the status indicates LISTEN. If a client is connected, it's IP
address is shown.
Accumulative connections
A counter that increments each time a client opens a Modbus/TCP connection.
Requests
A counter that increments each time an inbound request message is successfully
received.
UMMBDC200-2201
Web browser based management
17
Advertisement
Table of Contents
