Related Manuals for Kramer VM-30CA
Summary of Contents for Kramer VM-30CA
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Model: VM-30CA 1:3 Video Component / Audio Distributor... -
Page 2: Table Of Contents
Technical Specifications Figures Figure 1: VM-30CA 1:3 Video Component / Audio Distributor Figure 2: Connecting the VM-30CA 1:3 Video Component / Audio Distributor Tables Table 1: VM-30CA 1:3 Video Component / Audio Distributor Features Table 2: Technical Specifications of the VM-30CA... -
Page 3: Introduction
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from our Web site: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction... - Page 4 Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
-
Page 5: Overview
Front panel trimmers to control the level and EQ. of the Y, P video components Audio level control for the unbalanced stereo audio outputs The VM-30CA is housed in a desktop-sized enclosure, and is 12V DC fed. To achieve the best performance: Connect only good quality connection cables, thus avoiding interference,... -
Page 6: Your Vm-30Ca 1:3 Video Component / Audio Distributor
Your VM-30CA 1:3 Video Component / Audio Distributor Your VM-30CA 1:3 Video Component / Audio Distributor Figure 1 and Table 1 define the front and rear panels of the VM-30CA: Figure 1: VM-30CA 1:3 Video Component / Audio Distributor Table 1: VM-30CA 1:3 Video Component / Audio Distributor Features... -
Page 7: Connecting The Vm-30Ca
Y, P equalization level. 1 Switch OFF the power on each device before connecting it to your VM-30CA. After connecting your VM-30CA, switch on its power and then switch on the power on each device 2 You can connect three component video output connectors to up to three component video acceptors. When less than three outputs are required, connect only those outputs of the VM-30CA that are required, and leave the other outputs unconnected 3 Alternatively, connect the ANALOG AUDIO 3.5m socket (not shown in Figure 2) -
Page 8: Figure 2: Connecting The Vm-30Ca 1:3 Video Component / Audio Distributor
Connecting the VM-30CA Figure 2: Connecting the VM-30CA 1:3 Video Component / Audio Distributor KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 9: Technical Specifications
3.7 kg (8.2 lbs.) approx. ACCESSORIES: Power supply OPTIONS: RK-1 Rack adapter 1 Specifications are subject to change without notice Technical Specifications of the VM-30CA AUDIO: 1.8pp (S/PDIF); 25dBm (analog) AUDIO: >100kHz AUDIO: 87dB (analog) AUDIO: Input: AC; Output: DC... - Page 10 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 11 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VM-30CA and is the answer not in the manual?
Questions and answers