Installing Additional Memory - Microsd Card - Telstra TOUGH T90 User Manual

8.2 8.2 Installing Additional Memory – MicroSD 8.2 Installing Additional Memory – MicroSD card Installing Additional Memory – MicroSD Installing Additional Memory – MicroSD
8.2 8.2 Installing Additional Memory – MicroSD
Handset memory can be increased by inserting a Micro SD (HC) card up to 8GB.
Micro SD cards up to 2GB are supported (FAT 16 format).
Micro SD HC (high capacity) cards up to 8GB are supported (FAT 32 format).
Open the back of the handset and remove the battery.
Slide down the Micro SD card holder (1) to release the lock and raise.
Carefully insert the Micro SD card (2) as shown above.
Place the card into position, lower the card holder and lock by sliding the holder up.
Re-insert the battery, close the back cover and switch the handset on.
Menu > File Manager Menu Menu Menu Menu File Manager > tab right to Memory Card File Manager File Manager File Manager
With the Micro SD card inserted the default storage location (for photos etc) is the Ex-
t t t t t ernal Memory ernal Memory. You can set this under Menu ernal Memory ernal Memory
ernal Memory
Download Download location Download Download Download location. location location location
Always handle memory cards with care and avoid static discharge.
Memory Card Memory Card Memory Card to access your stored files. Memory Card
Menu > Set Menu Menu Set Settings Set tings > tab right to Handset tings tings
Menu Set tings
card card card
card
Handset > Handset Handset
Handset
8
Ex- Ex- Ex-
Ex-
57